balance_of_plant¶
Electrical and thermal power balance of the plant
Maximum occurrences (MDS+ backend only): 1
New in version 4.1.0: lifecycle status alpha
Changed in version 4.1.0.
ids_propertiesstructure¶
See common IDS structure reference: ids_properties.
gain_plant(:) ⇹1FLT_1D¶Electricity gain of the plant (ratio of net electric / plant […]
Electricity gain of the plant (ratio of net electric / plant electricity during operation)
1 |
thermal_efficiency_cycle(:) ⇹1FLT_1D¶The fractional thermal effiency of the power cycle. […]
The fractional thermal effiency of the power cycle. Calculated as 1 - Q_out/Q_in
1 |
thermal_efficiency_plant(:) ⇹1FLT_1D¶The fractional thermal effiency of the entire BOP thermal plant, […]
The fractional thermal effiency of the entire BOP thermal plant, inlcudes all of the individual cycles. Calculated as 1 - Q_out/Q_in
1 |
power_electric_plant_operationstructure¶Electric plant operation
Electric plant operation
power_electric_plant_operation/power_total(:) ⇹WFLT_1D¶Total electrical power used to operate the plant
Total electrical power used to operate the plant
1 |
power_electric_plant_operation/system(i1)AoS¶Set of systems involved in the electric plant operation
Set of systems involved in the electric plant operation
Maximum occurrences (MDS+ backend only): 10
1 |
|
power_electric_plant_operation/system(i1)/nameSTR_0D¶Short string identifier (unique for a given device)
Short string identifier (unique for a given device)
power_electric_plant_operation/system(i1)/descriptionSTR_0D¶Description, e.g. […]
Description, e.g. “divertor Helium cooling loop”
New in version >3.
power_electric_plant_operation/system(i1)/power(:) ⇹WFLT_1D¶Electrical power used to operate the system
Electrical power used to operate the system
1 |
power_electric_plant_operation/system(i1)/subsystem(i2)AoS¶Set of subsystems
Set of subsystems
Maximum occurrences (MDS+ backend only): 10
1 |
|
power_electric_plant_operation/system(i1)/subsystem(i2)/nameSTR_0D¶Short string identifier (unique for a given device)
Short string identifier (unique for a given device)
power_electric_plant_operation/system(i1)/subsystem(i2)/descriptionSTR_0D¶Description, e.g. […]
Description, e.g. “compressor”
New in version >3.
power_plantstructure¶Energy conversion
Energy conversion
power_plant/generator_conversion_efficiency(:) ⇹1FLT_1D¶Conversion efficiency of thermal to electric power of the steam […]
Conversion efficiency of thermal to electric power of the steam cycle
1 |
power_plant/heat_load_breeder(:) ⇹WFLT_1D¶Heat flow towards the breeder
Heat flow towards the breeder
1 |
power_plant/heat_load_divertor(:) ⇹WFLT_1D¶Heat flow towards the divertor
Heat flow towards the divertor
1 |
power_plant/power_cycle_typestructure¶Type of the primary power cycle
Type of the primary power cycle
This is an identifier. See power_cycle_identifier for the available options.
power_plant/power_electric_generated(:) ⇹WFLT_1D¶Net electric power produced by thermal plant, equal to power […]
Net electric power produced by thermal plant, equal to power produced by turbines LESS power consumed by pumps and compressors
1 |
power_plant/total_heat_rejected(:) ⇹WFLT_1D¶Total heat flow being rejected from the thermal plant
Total heat flow being rejected from the thermal plant
1 |
power_plant/total_heat_supplied(:) ⇹WFLT_1D¶Total heat flow being supplied to the thermal plant (fusion thermal […]
Total heat flow being supplied to the thermal plant (fusion thermal power)
1 |
power_plant/system(i1)AoS¶Set of subsystems or circuits of the power conversion system, […]
Set of subsystems or circuits of the power conversion system, connected by their edges, e.g. divertor cooling loop
Maximum occurrences (MDS+ backend only): 10
1 |
|
power_plant/system(i1)/nameSTR_0D¶Short string identifier (unique for a given device)
Short string identifier (unique for a given device)
power_plant/system(i1)/descriptionSTR_0D¶Description, e.g. […]
Description, e.g. “divertor Helium cooling loop”
New in version >3.
power_plant/system(i1)/component(i2)AoS¶Set of components of the power conversion system
Set of components of the power conversion system
Maximum occurrences (MDS+ backend only): 10
1 |
|
power_plant/system(i1)/component(i2)/nameSTR_0D¶Short string identifier (unique for a given device)
Short string identifier (unique for a given device)
power_plant/system(i1)/component(i2)/descriptionSTR_0D¶Description, e.g. […]
Description, e.g. “compressor”
New in version >3.
power_plant/system(i1)/component(i2)/port(i3)AoS¶Set of ports (input or output) of the component
Set of ports (input or output) of the component
Maximum occurrences (MDS+ backend only): 4
1 |
|
power_plant/system(i1)/component(i2)/port(i3)/descriptionSTR_0D¶Description, e.g. […]
Description, e.g. “input #1”
New in version >3.
power_plant/system(i1)/component(i2)/port(i3)/mass_flow(:) ⇹kg.s^-1FLT_1D¶Mass flow rate of the fluid
Mass flow rate of the fluid
1 |
power_plant/system(i1)/component(i2)/port(i3)/power_mechanical(:) ⇹WFLT_1D¶Shaft power associated with the component, (+) = into the system, […]
Shaft power associated with the component, (+) = into the system, (-) = out of the system
1 |
power_plant/system(i1)/component(i2)/port(i3)/temperature(:) ⇹KFLT_1D¶Fluid temperature
Fluid temperature
1 |